2007 Mustang GT/CS Vert

You’re all welcomed.

In reading this over, I thought I should do a full disclosure on the Ford Racing intake.

This piece should be reserved for use only with ported heads, big cam and long tube headers, along with appropriate supporting TB, CAI and a gear swap.
It is the only way it gives good return, if you prioritize high rpm power over easy drivability and passenger approachability-comfort.

The reason is because with any less supporting hardware, this intake loses too much low end torque and drivability.
If one were to use it without the supporting goodies, you would not like driving your car compared to its stock form

The supporting hardware needs to include the LT’s.
And we have already had a lengthy discussion on those.
They increase noise level a lot.
If not willing to do LT’s, don’t even consider the FR intake.

For fun and occupant friendly driving on 3V S197, one needs to retain the factory intake manifold.
So a good recipe would be good CAI, TB, Hot Rod cams and LT’s optional.
If doing cams and/or LT’s then CMDP’s should be highly considered.
Also a strong consideration to going up at least one gear size in the rear.
So for manual 05 to 10, go from 3.55 to 3.73.
This will help the cams to get going because they too lose a bit of low end when getting going from a stop, but not nearly as much as the FR intake.

So, basically I’m saying don’t throw this intake on because it looks good.
Without the supporting hardware, you will not like your car.

The engine bay of the user friendly formula using recent proven and quality parts would look something like this.
The Hot Rod cams would really give it character and add performance.
LT’s totally optional and up to each individual.

1E08A1DA-FA62-4655-B0B3-1AB0622BB43F.jpeg
 
Last edited:
Yuppp!! NOT planning for that manifold here for sure.

eventually when we can meet and not die within 2m, I’d like to take a trip in the green to hear your LT for myself tho, as it’s subjective. My setup would be LT, catted and H-pipe (sound preferences here).

As for the gears. Since the whiteline watts link replaces the stock diff cover, i start to think it sould be a good time to swap to 3.73 (already have that set in my mind) AND ford racing carbon clutch pack for good measures. I still need to source both parts, a place to install gears around Moncton AND somewhere i can have customized the convertible brace to go underneath my watts link. Might even shop online to see if aftermarket of these braces exist somewhere (OE replacement, not customs of course).... ?
 
The clutch I had in my 08 Vert
was a macleod pro street,
Could handle up to 800hp
without going full race versions

I was ver happy with it and was not crazy money,
might be an option for you to research.
I like the Ford racing 373 gears of changing those out
in future. nice, not massive jump, but from 355's
still quite noticable difference.
 
Yesterday i had an appointment to straighten up the exhaust tips. The MBRP axle backs didn’t come with perfectly aligned hangers, to put it politely. Come to know that i had a broken bracket on top of loose exhaust clamps. The shop used fixed the bracket, put a little tack weld under the exhaust clamps once the exhaust were aligned and properly retightened the clamps. Not only are m tips aligned now, 98% of the drone is gone lol. Damn cheap clamps ?.
Beauty shot featuring my thumb.
77208FE1-5BD8-41D7-A859-3FAC2D46D6B2.jpeg
 
Really glad you got rid of the drone.
I never said anything before but always thought you spoke a lot about the drone.

Now, I know why!
Hopefully you appreciate your car all over again. ??


I know they are really oposite vehicles, but if you'd encountered my Focus ST, you would understand my drone hatred. 3'' downpipe with high flow cat, Roush 3'' catback exhaust (yep, they're as loud on that car than a mustang). Need I say the 4 cylinder buzzing sound was high? On top of that, drone zone was between 112km-125km/h..... REALLY not fun on long trips lol ... And to put it into perspectives, someone parked say Casino NB, would hear me coming from almost Jean's restaurant OR little over Magnetic Hill lol .....

Don't get me wrong, drone is not dead 100%, but it's a level i can start to use my 5th gear at 95km/h again lolllll.
 
And it IS why I have my MBRP. Done my research. We all know the best are the ones Gerry has on it's car (Ford Racing), but at almost $1K for an axle back, it was a hard turn down for me, hence why I've went with MBRP. The 3.73 will eventually move the drone zone a little so it'll be easier to avoid, but, so used to driving in 4th gear it's really a non issue anymore lol :ROFLMAO:
 
I don’t know MBRP.
I run Magnaflow on the 06.
Not much drone.
Just a bit at 2000 rpm.
Not enough, I feel, to make it worth talking about.

You do get what you pay for.
Which is why I’m getting the Ford Performance by Borla for the 15.
 
Last edited:
Back
Top