Mustang Trivia.
- Thread starter Ohtobbad
- Start date
TrueBlue02058
Post King
As far as Boss 302 being a Big Block, my friend Marc that has the 73 Mach1 with the 351 Cleveland 2 barrel told me the 351 was a Big Block ? Not sure about that and I can’t see a 302 being a Big Block.
thundr
Well-known member
The 9" was introduced in 1957 in the F 100 and F150
so everyone was wrong?
TrueBlue02058
Post King
Look it up, we need an answer and a new question ?
thundr
Well-known member
No, it was just a mustang question. Unless I mussed the 1957 Mustang. You were around then weren't you.
05 gt 5spd
On the road again
4.2 litre , 256 cu in. V8. Wonder why it didn’t last ?
according to this sheet California was the place to be in 1981 ,
This was also used in some F150’s. Special Exercise option; you had to push the F150 up every hill !
| 1980 4.2L 2V V-8 | 4.00 x 3.00 inches | 8.8:1 | 118hp | 194 ft-lbs |
| 1981 4.2L 2V V-8 | 3.38 x 3.00 inches | 8.8:1 | 115hp/120hp Calif. | 194 ft-lbs/205 ft-lbs Calif. |
according to this sheet California was the place to be in 1981 ,
This was also used in some F150’s. Special Exercise option; you had to push the F150 up every hill !
TrueBlue02058
Post King
And we thought the 140 HP 5.0 was Gutless
Your question Gerry ?
Your question Gerry ?
no, but you were, your far older than me and it shows
TrueBlue02058
Post King
Standard Engine was 101 HP 170 CI Six Cylinder, Options were 164 HP 260 CI V8 and 210 HP 289 V8.
correct, ask a question
TrueBlue02058
Post King
What engines were offered in 2003 Mustangs, base, Mach1 and SVT Cobra including HP ?
Mcdavis
King of the road trip
I though the 4.6 had 260 HP?
TrueBlue02058
Post King
It did, only 01 BULLITT was initially rated at 265. Only one that you got right Hugh is 390 HP for Cobra, first three are wrong.
TrueBlue02058
Post King
And you were low on the HP for V6 and too high for Mach1.
Does Fred really remember this stuff or is he using his Mustang Bible?!!