Search results

yup big dog issues right there

Almost back on the ground

Jacking rail build is now compete - I started with some 2x3 rectangular tube - had to cut it to match the contour and depth needed to be just lower than the pinch weld area and match the slope of the inner rocker ledge. A bit of time spent learning the plasma cutter and all went well. Primed...

When Dads truck was still working for its keep

If I’m paying 300,000 it better be making me money- not that I have the 300,000 to spend

Ordered some steel last night - going to see if home made jacking rails can happen before spring -

I’d say about 20cm here in Enfield, at least the snowblower likes this stuff

I drive the car a lot so I wear some parts out-others time just takes a toll . It’s nice to be able to find a deal - the Steeda billet control arms were off another Maritime Mustang car that got returned to stock so it could be sold a few years ago. I got to be the new parts owner. One never...

Yes. The paint can made an appearance - I cleaned up the shocks and lower control arms while I was there as well . Got axle back under the car and bolted in. Still have driveshaft -rear sway bar and brakes to finish before it gets back on the ground

It’s been a busy couple of weeks - not much time for car stuff when sitting in a hotel room in another province. Finally got everything in the axle and it’s back in one piece, now to get it back under the car and hope for a quiet set up when it’s driving time.

🎂🎂🎂🎂🎂🎂🎂🎂🎂🎂 Happy10th Birthday Maritime Mustang

Congratulations Martin

Wishing for Summer Hawks Nest NY

This is the best I have for now - car currently sits on jackstands missing a differential housing, that does not make a good winter photo!

These pictures look a lot like 2019 - Pinion seal leak - axle seal leak and a bit of gear wine added up to winter works project now in process Time to goo um on blocks again Diff out and apart Time to make some measurements - Axle end play was good @ .020" each end, Backlash was larger...

Really Nice truck - not in my price range at all ! I'm not sure a new 2wd Maverick would fit in my budget these days

My Motor Monday still needs a lot of work ! I’m collecting parts for a 390 build for the truck. So far - 2 blocks -one .040 over -a good crank - pistons - rods - 750 Holley that needs rebuild -Holley “street dominator “4bbl dome and a set of vintage aluminum valve covers - someday I’ll get it...

Time to break out the laser level !