Hey guys, it's that time again. I'm selling the beamer to make room in my 1-car stable for a new stang. I just picked up a beauty; it's a 1989 GT, black and grey two-tone. Approximately 105k on the body and 6k on the motor build. It's got a few small issues to work out, but the driveline is solid and the body is in fantastic shape!
The build was completed by Dasilva Racing in Ontario:
Y303 SVO Heads
Edelbrock Intake
Vortech V3 supercharger w/2.95 pulley
Upgraded to 8-rib pulley setup
302 Valley girdle
Ford "Cobra" valve covers
Locking oil dipstick
Aeromotive fuel pressure regulator
AEM Meth injection
EGR spacer
42lb Injectors
E303 Cam
1.6 Rocker Arms
65mm Throttle Body
80mm Pro-M MAF
A/C Delete
MM Caster/Camber plates
MM Tie-rods
KYB Struts/Shocks
T5 transmission
ACT Clutch
MSD ignition and coil
Line-lock
17" black bullet wheels
Fenders rolled for 275 rear tires
3.73 Gears
Subframe connecters
Ford Racing springs
Cobra Disc brake conversion
Mac Ceramic shorty headers
3" Exhaust - X-pipe & Flowmaster Cat Back
New Medium-Grey leather upholstery
"A few" gauges and meters
It dyno'd at 397whp on 5psi and 453whp on 9psi (only tuned/setup for 5psi at this time)
A couple short vids:
https://goo.gl/photos/WQXU1PkbtAnFBaZ3A
https://goo.gl/photos/GnDf8be1dtxHw8hv5
The build was completed by Dasilva Racing in Ontario:
Y303 SVO Heads
Edelbrock Intake
Vortech V3 supercharger w/2.95 pulley
Upgraded to 8-rib pulley setup
302 Valley girdle
Ford "Cobra" valve covers
Locking oil dipstick
Aeromotive fuel pressure regulator
AEM Meth injection
EGR spacer
42lb Injectors
E303 Cam
1.6 Rocker Arms
65mm Throttle Body
80mm Pro-M MAF
A/C Delete
MM Caster/Camber plates
MM Tie-rods
KYB Struts/Shocks
T5 transmission
ACT Clutch
MSD ignition and coil
Line-lock
17" black bullet wheels
Fenders rolled for 275 rear tires
3.73 Gears
Subframe connecters
Ford Racing springs
Cobra Disc brake conversion
Mac Ceramic shorty headers
3" Exhaust - X-pipe & Flowmaster Cat Back
New Medium-Grey leather upholstery
"A few" gauges and meters
It dyno'd at 397whp on 5psi and 453whp on 9psi (only tuned/setup for 5psi at this time)
A couple short vids:
https://goo.gl/photos/WQXU1PkbtAnFBaZ3A
https://goo.gl/photos/GnDf8be1dtxHw8hv5
Attachments
Last edited: